23, Jalan Sri Plentong 3,
Taman Perindustrian Sri Plentong,
81750 Masai,
Johor, Malaysia.
+6016-718 8538
+607-388 9223
+607-388 1223
+607-388 9223
+607-388 1223
+607-388 4223

| Previous | 1 / 5 | Next |
| Performance | |||
| Maximum line pull (winch) | 48 tons | ||
| Wire-rope max. length | 335 m | ||
| Wire-rope diameter | 28mm, IWRC 6x29F1 | ||
| Weight | 40,000 kg | ||
| Shoe width | 800 mm | ||
| Drawbar pulling force | 333 kN | ||
| Swing speed | 10 rpm | ||
| Treval motor speed (high/low) | 5.6/3.3 km/h | ||
| Engine | |||
| Model | HINO J08EUN | ||
| Type | Direct injection, water-cooled, 4-circle, 6 cylinder, | ||
| diesel engine with intercooler turbo-charge | |||
| Power output | (ISO9249) | 188kw/2,100rpm | |
| (ISO14396) | 200kw/2,100rpm | ||
| Max. torque | (ISO9249) | 969Nm/1,600rpm | |
| (ISO14396) | 998Nm/1,600rpm | ||
| Displacement | 7,684 L | ||
| Hydraulic System | |||
| Pump | Two Variable displacement pump + one gear pump | ||
| Max Discharge flow | 294x2, 21x1 L/min | ||
| Relief valve setting (main/power boost) | 34.3/37.8 Mpa | ||
| Travel motor | 2xvariable displacement piston pump | ||
| Hydraulic oil tank (system) | 245/410 L | ||
| Swing motor | Axial piston motor | ||
| Refilling Capacities & Lubrications | |||
| Fuel tank | 503 L | ||
| Cooling system | 35b L | ||
| Engine oil | 28.5 L | ||
| Travel reduction gear | 2x8.0 L | ||
| Swing reduction gear | 7 L | ||
| available in | ||