23, Jalan Sri Plentong 3,
Taman Perindustrian Sri Plentong,
81750 Masai,
Johor, Malaysia.
+6016-718 8538
+607-388 9223
+607-388 1223
+607-388 9223
+607-388 1223
+607-388 4223

| Previous | 2 / 5 | Next |
| Performance | ||
| Maximum line pull (Winch) | 33 tons | |
| Wire-rope max. length | 305 m | |
| Wire-rope diameter | 25mm, IWRC 6x29F1 | |
| Weight | 24,000 kg | |
| Ground pressure | 49 kpa | |
| Shoe width | 800 mm | |
| Drawbar pulling force | 228 kN | |
| Swing speed | 13.3 rpm | |
| Treval motor speed (High/low) | 6.0/3.6 km/h | |
| Engine | ||
| Model | HINO J05ETG-KSSG | |
| Type | Direct injection, water-cooled, 4-cycle, | |
| 4-cylinder, diesel engine with watercooler turbo charger | ||
| Power output | (ISO9249) | 114KW/2,000rpm |
| (ISO14396) | 118KW/2,000rpm | |
| Max. torque | (ISO9249) | 569NM/1,600rpm |
| (ISO14396) | 592NM/1,600rpm | |
| Displacement | 5,123 L | |
| Hydraulic System | ||
| Pump | Two Variable displacement pump + one gear pump | |
| Max Discharge flow | 220x2 L/min, 21L/min | |
| Relief valve setting (main/power boost) | 34.3/37.8 Mpa | |
| Travel motor | 2xaxial-piston, 2 step motors | |
| Hydraulic oil tank (system) | 140/244 L | |
| Swing motor | Axial piston motor | |
| Refilling Capacities & Lubrications | ||
| Fuel tank | 370 L | |
| Cooling system | 22 L | |
| Engine oil | 22 L | |
| Travel reduction gear | 2x5.3 L | |
| Swing reduction gear | 3.0 L | |
| available in | ||